We eliminate high risk components from our reagents for a safe use and transport.
We reduce the number and the quantity of the reagents used during the tests to have more practical smaller test kits.
We continuously improve the ease and the comfort of the test procedures but remain inflexible on the fact that our quick methods widely simplified must conform to the fields for which they were designed for.
Non-bleeding - Distinct colors - High quality color sale print.
4pads for easy matching
intervalls of 1 pH unit
More than 3 years shelf life.
Test strips supplied in transparent case
pH 7 Buffer 250ml "SPECIAL BOTTLE"
Green Color
Important features :
Metrological traceability (N.I.S.T.)
Buffers are color-coded and are factory tested for stability upon exposure to UV radiation and during freezing
The unique dosing bottle allows sensor calibration in the bottle without general contamination
Economical operation (for calibration use only a small quantity of sample)
Stability 2 years
Fast simultaneous measurement of Total Hardness, Calcium Hardness, Magnesium Hardness, pH and chloride in less than 60 seconds.
Simultaneous calibration with the 3 same global standard solutions (P1, P2 and P3)
No hazardous reagents
Meter supplied with Windows software with intuitive multilingual guide step by step (for use with your PC or tablet via USB)
For Hardness, The results are expressed by the software either in degrees German , French degrees, ppm, mmol ... to the user's choice
The meter can measure more parameters simultaneously by only adding MiniSensors (for example Nitrate, Ammonium, Potassium, Copper, Silver, Fluoride ...)
This revolutionary technology based on carbon nanotubes hugely simplifies the potentiometric measurements. Simultaneous measurement & calibration of several ions is possible and as fast & simple as a pH or conductivity reading
SEE BROCHURE
The Molybdate test strip detects molybdate levels from 0-350ppm in increments of 0-25-50-100-150-200-250-300-350ppm. Molybdate is commonly used as a corrosion inhibitor in the water treatment industry. Molybdate is effective in chilled or hot water systems over a wide pH range and is not normally affected by the use of biocides, such as chlorine. When used alone, molybdate levels of 300 ppm or more are needed to effectively inhibit corrosion.
This can be expensive, and therefore most molybdate-based inhibitors include other ingredients that enhance the overall inhibition properties and reduce the amount of molybdate needed. This test strip can provide an economical means to monitor ppm levels. Consult with the manufacturer of the treatment chemical being used for details on the concentration of molybdate to be maintained.
Instructions:
Dip the Molybdate test strip into the solution for 1 second.
Shake off excess liquid and compare to color chart within 10 seconds.
Tube with 50 test strips
Burette à zéro Automatique 0 - 30 degrés Français
Graduation tous les 0,5 degrés Français
Grande visibilite et ergonomie
Haute qualité - fabriquée en Allemagne
Livrée complète avec socle, flacon de 1 Litre et pince
Modèle Luxe (il existe aussi un modèle économique disponible réf: BA01F)
• Small field Incubator including one shelf for the microbiology
• For 20 bottles or 8 dipslides or 8 petri –dishes
• Temperature setting: + 35° C ± 2.0° C and adjustable up to 42°C
• Made in Germany (Labelling: CE)
• With Clear window lid for easy viewing
• With integrated thermometer
• Volume : 3350 cm3
• Inside Dimensions : L x l x h (mm) : 210 x 145 x 110
• OutsideDimensions : L x l x h (mm) : 300 x 170 x 150
• Weight (kg) : 1,3
• 2 control diodes for power and thermostat
• Performance: 30 W
• Can be installed horizontally or vertically
High performance portable turibidimeter, 2 to 5 points calibration, 0,01 NTU detection limit, selectable four turbidity units. The meter is suitable for process control and field use. It is measuring according ISO 7027 nephelometric method (90°).
• Easy-to-use portable turbidimeter is equipped with a large LCD display.
• 2 to 5 points calibration.
• Selectable four turbidity units, including the NTU (Nephelometric Turbidity Unit), FNU (Formazine Turbidity Unit), EBC (European Brewery Convention) and ASBC (American Society of Brewing Chemists).
• Single measurement model automatically recognizes the stable reading.
• Continuous measurement model that can be used for indexing and matching the sample vials.
• Auto-Power Off helps user effectively conserve battery life.
• System menu allows setting the 7 parameters, including the date and time, resolution, etc.
• Reset feature automatically resumes all settings back to factory default options.
• Expanded memory stores and recalls up to 100 readings.
• Stored data can be transferred into computer by USB communication interface.
• Multi-mode power scheme (battery, power adapter, USB port) ensures that use the meter smoothly.
Delivery Includes: Glass sample vials, calibration standards (0.02, 10, 200, 500 and 1000 NTU), lint-free cloth, battery and carrying case.
Peroxide Test Strips 0 - 1000 ppm (100 strips)
Range : 0 - 100 - 200 - 400 - 600 - 800 - 1000 mg/l
Phosphate Test Strips 0-500 ppm (100 strips)
Range : 0 - 3 - 10 - 25 - 50 - 100 - 250 - 500 mg/l PO4
Simple and easy to use turbidity test, designed to give a measure of the suspended solids content of the final effluent. It is also useful to follow day to day variation in quality of sewage and effluent.
Test Procedure
1. Hold the tube vertically over a white surface and view downwards.
2. Gradually pour in the effluent sample until the black cross is just no longer visible.
3. Read off the graduation corresponding to the height of the sample in the tube. This represents the turbidity of the effluent in JacksonTurbidity units (JTU).
For sewage effluents the graduations may also be taken as being approximately equivalent to the Suspended Solids Content as milligrams per litre.
The Royal Commission Standards for Effluents recommend that the suspended solids content of sewage effluent should not be more than 30 mg/l.
The tube should be rinsed after use. Any staining may be removed by the use of a household detergent.
There is generally a close relationship between turbidity and the BOD value of settled sewage and effluent. The probable BOD can be calculated from the result of the turbidity test using the following formula : Probable BOD = (Turbidity divided by 2) + 5
The Royal Commission Standard for Effluents recommends a BOD value of not more than 20 mg/l.
Burette de Mohr 0 - 30° français livrée complète
Graduation tous les 0,5 degrés français